LIBRARY
INFORMATION CENTER
STRIP DOOR CHARTS & GUIDES
WIDTH/GAUGE | PERCENT OVERLAP |
INTERIOR DOORS |
EXTERIOR DOORS |
When choosing strip sizes and overlaps, consider the following:
|
4″ x .060 | Partial (50%) | 4′ | — | |
4″ x .060 | Full (100%) | 4′ | — | |
6″ x .060 | Partial (66%) | 7′ | — | |
6″ x .060 | Full (100%) | 7′ | — | |
8″ x .080 | Partial (50%) | 10′ | 7′ | |
8″ x .080 | Full (100%) | 10′ | 7′ | |
12″ x .120 | Partial (66%) | 12′ | 8′ | |
12″ x .120 | Full (100%) | 14′ | 10′ | |
16″ x .160 | Partial (75%) | 16′ | 12′ | |
16″ x .160 | Full (100%) | 20′ | 18′ |
PROPERTY | ASTM TEST METHOD |
DIN TEST METHOD |
UNIT | FORMULATION | |
STANDARD | LOW-TEMP | ||||
Hardness Shore A (15 sec.) | D-2240 | 53505 | — | 80 | 78 |
Tensile Strength @ Break | D-638 | 53455 | PSI | 2680 | 2315 |
Elongation @ Break | D-638 | 53455 | % | 322 | 310 |
Tear Resistance | D-1004 | 53515 | lb. / in. | 335 | 302 |
Cold Temperature Resistance | D-746 | 53372 | °F | -38° | -55° |
Light Transmittance (Haze) | Hunter | — | % | 2.85 | 3.95 |
Weather Resistance @ 500 hrs. | QUV | 53384 | Delta E | 4.31 | 36.75 |
Flammability (LOI) | D-2863 | — | % | 19 | 20 |
PROPERTY | ASTM TEST METHOD | DIN TEST METHOD | UNIT | RESULTS |
Specific Gravity | D-792 | 51757 | 1.23 | |
Hardness Shore A (15 sec) | D-2240 | 53505 | 78 | |
(Instant Shore A) | 81 | |||
Tensile Strength @ Break | D-638 | 53455 | PSI | 2680 |
Elongation @ Break | D-638 | 53455 | % | 322 |
100% Modulus | PSI | 1804 | ||
Tear Resistance | D-1004 | 53515 | lb/in | 335 |
Cold Temperature Resistance | D-746 | 53372 | ̊C | -38 |
Surface Resistivity | D-257 | 53482 | OHMS2 X 10^6-10^8@ 50% RH | 1 |
Static Decay @ 5k Volts | Fed 101B, Method 4046 | Seconds | <0.5 | |
Water Absorption (4 days 23C) | SPI VD T-12 | 53476 | Weight % | 0.06 |
Light Transmittance | Hunter | % | 2.85 | |
Flammability | D-2863 | % | 19 |
The information contained herein is based upon data believe to be reliable and relates only to the matters specifically contained herein. Although such information is, to be best of our knowledge and belief, accurate and reliable as of the date hereof, no representation, warranty (express or implied, or merchantability, fitness or otherwise or guarantee is made as to the suitability, accuracy, reliability or completeness of the information. It is the user’s responsibility to satisfy itself as to the suitability, accuracy, reliability and completeness of such information for its particular use. There is no warranty against patent infringement and ES Robbins, Corp. shall not be liable for any loss, damage, or injury that may occur from the use of this information. No statement herein shall be construed as an endorsement of any product or process.
(Sound Transmission Class 13)
FREQ. TRANS (HERTZ) |
FREQ. LOSS (db) |
FREQ. TRANS (HERTZ) |
FREQ. LOSS (db) |
100 | 6 | 800 | 11 |
125 | 8 | 1000 | 12 |
160 | 7 | 1250 | 14 |
200 | 8 | 1600 | 14 |
250 | 9 | 2000 | 15 |
315 | 10 | 2500 | 16 |
400 | 10 | 3150 | 16 |
500 | 10 | 4000 | 17 |
630 | 11 | 5000 | 17 |
Percentage of Light Transmission for
Each Specified Wavelength
DARK AMBER | ||
.080″ | .120″ | |
220-492 nm | <0.1 | <0.1 |
492-560 nm | 19.5 | 9.0 |
628 nm | 24.5 | 13.0 |
696 nm | 29.0 | 16.0 |
764 nm | 32.5 | 19.0 |
832 nm | 35.5 | 21.5 |
900 nm | 37.5 | 24.0 |
SPEC SHEETS
HARDWARE INSTALLATION INSTRUCTIONS
LIBRARY
INFORMATION CENTER
STRIP DOOR CHARTS & GUIDES
WIDTH/GAUGE | PERCENT OVERLAP |
INTERIOR DOORS |
EXTERIOR DOORS |
4" x .060 | Partial (50%) | 4' | — |
4" x .060 | Full (100%) | 4' | — |
6" x .060 | Partial (66%) | 7' | — |
6" x .060 | Full (100%) | 7' | — |
8" x .080 | Partial (50%) | 10' | 7' |
8" x .080 | Full (100%) | 10' | 7' |
12" x .120 | Partial (66%) | 12' | 8' |
12" x .120 | Full (100%) | 14' | 10' |
16" x .160 | Partial (75%) | 16' | 12' |
16" x .160 | Full (100%) | 20' | 18' |
When choosing strip sizes and overlaps, consider the following:
- For taller doors, the strips should be heavier and wider
- Smaller width strips are easier to pass through than wide strips
- When air movement is a problem, choose the wider strip with full overlap
- Consult your Aleco customer service representative
PROPERTY | ASTM TEST METHOD |
DIN TEST METHOD |
UNIT | FORMULATION | |
STANDARD | LOW-TEMP | ||||
Hardness Shore A (15 sec.) | D-2240 | 53505 | — | 80 | 78 |
Tensile Strength @ Break | D-638 | 53455 | PSI | 2680 | 2315 |
Elongation @ Break | D-638 | 53455 | % | 322 | 310 |
Tear Resistance | D-1004 | 53515 | lb. / in. | 335 | 302 |
Cold Temperature Resistance | D-746 | 53372 | °F | -38° | -55° |
Light Transmittance (Haze) | Hunter | — | % | 2.85 | 3.95 |
Weather Resistance @ 500 hrs. | QUV | 53384 | Delta E | 4.31 | 36.75 |
Flammability (LOI) | D-2863 | — | % | 19 | 20 |
(Sound Transmission Class 13)
FREQ. TRANS (HERTZ) |
FREQ. LOSS (db) |
FREQ. TRANS (HERTZ) |
FREQ. LOSS (db) |
100 | 6 | 800 | 11 |
125 | 8 | 1000 | 12 |
160 | 7 | 1250 | 14 |
200 | 8 | 1600 | 14 |
250 | 9 | 2000 | 15 |
315 | 10 | 2500 | 16 |
400 | 10 | 3150 | 16 |
500 | 10 | 4000 | 17 |
630 | 11 | 5000 | 17 |
Percentage of Light Transmission for
Each Specified Wavelength
DARK AMBER | ||
.080" | .120" | |
220-492 nm | <0.1 | <0.1 |
492-560 nm | 19.5 | 9.0 |
628 nm | 24.5 | 13.0 |
696 nm | 29.0 | 16.0 |
764 nm | 32.5 | 19.0 |
832 nm | 35.5 | 21.5 |
900 nm | 37.5 | 24.0 |